- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
Shopping Global
Quality Is Everything
Your shopping cart is empty.
Cart Total: $0.00
Proceed to Checkout
BMW INPA K+DCAN interface
K+DCAN USB Interface Description:
Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of FOR BMW from 1998 to 2008
(all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral
K+DCAN USB Interface Features:
read and delete errors
adaptations
driver programming
applu coding
and others...
Supports Protocols:
1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard FOR BMW protocol (FOR BMW OBD interface).
DCAN support For:
E60, E61 od 03/2007
E83 od 09/2006
E81, E87 od 03/2007
E90, E91, E92, E93 od 03/2007
E70 (new model X5)
R56 (new model MINI)
Protocol "FOR BMW OBD interface" for older cars:
from 1995 to 1998 (don't need K-line).
from 1998 to 03/2008 (all models)
Notice of using INPA K+CAN :
1.Before using this equipment, keep the battery of notebook fully charged to avoid battery broken.
Don’t charge the battery while diagnosing. Before charging, discharge the battery. You may knock down
the battery and connect the power line during long time diagnosing. To make sure the battery life.
2.While testing, to make sure the diagnostic lines well connected.
3.Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
4.After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
5.Don’t cut the power or connector during test.
6.Don’t touch the high temperature components in carriage during test