Lexia3 Diagbox Diagnostic Tool for PSA Vehicles(Full Chips PCB)

Lexia3 DiagBox Diagnostic Tool allows you to perform full diagnostics on all vehicles from 1995 up to the current models. All via OBD II connector or via manufacturer-specific connector (only for older cars, pre-2001). Once connected with PSA Diagbox software ,You can do all as authorized dealer does.
Lexia-3 Interface contains K-Line multiplexor, SAE J1850 Bus (both PWM and VPW) and CAN-BUS interfaces.Lexia3 works with DIESEL and PETROL cars.  

Full chips Lexia3 DiagBox Highlights:

1. High-Quality Lexia3 interface with Full Chip ,Golden-EDGE and Double PCB has 7pcs optocouplers, 12pcs Relays(that 4.5v make more stable).
   
2. With 921815C Firmware,Works with Citroen/Peugeot up to April 2022 + OPEL/Vauxhall up to 2021 models built by psa Diagbox.
3. The kit come with Diagbox V7.8.3. Diagbox software included Lexia3 and PP2000 all function.
4. We can offer you download link for DIAGBOX V9.91(Relased on 2020/04) which support vehicles till 2011 year .But you should install it under VMWARE and working on Any Windows 64bit.
5. For some vans (Peugeout Bipper, Boxer III, Citroen Nemo, Jumper III) you need extra s.1279 adapter which is not the part of this set.
6. Diagbox support Multi Languages :English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

Lexia 3 workable vehicles:

• Peugeot: Peugeot 108, 206, 406, 407, 208, 308, 508, Peugeot 2008 (SUV), 106, 3008 (SUV), 5008 (SUV), 301, 308 SW, 508 SW, Peugeot Bipper, Tepee, Rifter (MPV), Traveller (MPV), Expert (Van), Partner (Van), Boxer (Van).
• Citroen: C1, C3, C3 Aircross, Citroen C4, C4 Cactus, C4 Picasso, Citroën C5 Aircross, Berlingo, Citroën Jumpy, Citroën Jumper.
• DS Automobiles: DS 3, DS 3 Crossback, DS 4, DS 4 Crossback, DS 5.
• New Opel models 2018-2021 (based on PSA):Rocks-E,Corsa F,MOKKA ,ASTRA,GrandLand,COMBO LIFE, COMBO LIFE COMBO CARGO ,Zafira Vivaro Life,Vivaro ,MOVANO. Crossland X 2021 is still diagnosis under GDS2 EU software package .

Lexia3 DiagBox Diagnostic Tool Function:

• Read fault codes:Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
  The program supports report printing or copies to clipboard.
• Clear fault codes:this function clears all stored fault codes and other diagnostic information.
• Read identification:Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
• Auto-scan (complete car scan/test):Detects all ECUs (electronic control units) installed in the car and reads all diagnostic fault codes.
• Measured Values:Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in the graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
• Actuator test:Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

LEXIA 3 PP2000 Package List:

• 1pc x Lexia3 Mux with extension OBD2 cable
• 1pc x Long 9pin to USB cable
• 1pc x Short 9pin to USB cable
• 1pc x OBDII Diagnostic cable
• 1pc x 16pin to Clip Cable
• 1pc x Lexia3 diagbox/PP2000 Software DVD
• Option Part:(NOT INCLUDING)
  30Pin Cable For Peugeot 307
  S1279 Module