SM2PRO J2534 INTERFACE REVIEWS

SM2PRO (Scanmatik 2 Pro ) with PCMFLASH software is a device for reading and writing vehicle ECU FLASH, EEPROM, and PFLASHER modules.it will support a lots ECU models.This programmer suits professional automotive repair settings and field diagnostics requiring switch flash bench functions.
Not only ECU programming function ,but also work as Pass-Thru J2534 interface(suit for XENTRY PT/Techstream/VIDA Dice/JLR SDD/ODIS)

Review 1:

Did try my SM2 Pro on Volov Vida software today and work perfect.
Did scan system and read modules super fast, i have used Vxdiag Nano Vida before and it was so slow.Im happy at the moment, was worth it just to get a fast Vida Dice interface.Will test vdash soon.

Review 2:

Tested with PCM Flash module 42 (Denso SH705X Bootloader),try on Volvo V70 2.4 (B5244S) 170HK, with ECU Denso HN.2 (7055,29LV200,93C56)
Only gave me error, did test on obd but battery was low, will try on bench later.Tested on bech dont work

Review 3:

Mine older SM2pro was Successfully Read/Write:EDC17C50 and EDC17C06.but failed on EDC17C64,says “Transfering bootloader, Failure”
After then bought this SM2 pro with 3 LED bench cable ,I first tried with the switch ON, but failed again. Then I tried with the switch on AUTO and for my surprise it worked perfectly read and write.

Review 4:

Tested on Ford mondeo 2009 today.Forscan and sm2 pro as passthru did work great

Review 5:

I tested it in ODIS Engineering 17 and 18.2, as well as ODIS-Service 23.0.1 and 24.3 What seems to be fixed compared to 2.21.21 is that the ignition switch emulator popup finally shows up in ODIS.

SM2PRO Review 6:

The SM2 PRO fully implements (and is available in J2534 mode) the capabilities of a GM MDI Interface,which support GDS2 and Tech2Win programmer