MB SDconnect C4 DOIP Multiplexer,Mercedes Xentry Diagnostic Tool

MB SDconnect C4 DOIP is the Dealer level Diagnostic kit for Mercedes-Benz ,C4 Doip Support in-depth diagnostics all vehicle systems such as Engine, Gearbox (AT, MT), Anti-slip system (ABS), Air conditioning system (A/ C), airbag system (SRS), Anti-theft system (DASX), Remote lock control system (KEYLESS GO),…Not only diagnostic but also Coding, programming modules with Engineer software.

Some Mercedes models (after 2016) have a new DOIP protocol. To fix the module, you must have a DOIP SD C4 kit. DOIP is ISO 13400 diagnostic protocol ISO 13400-1:2011 describes common use cases and communication scenarios covered in Internet Protocol-based vehicle communication standard.

Notices:

1. This SDconnect C4 Multiplexer Support newest Doip(ethernet communication)
2. Work for 12V cars and 24V trucks from 1989 to 2023 Year.The XENTRY C6 VCI will required for 2024 model.
   
3. Lastest Xentry and Free DTS Monaco & Vediamo Developer pre-installed on Hard Disk.
4. Wi-Fi and LAN cable Connection
5. C4 DOIP OBD Kit only have OBDII cable and LAN cable.

MB SDconnect C4 Doip Software Package:

• Xentry /DAS 09.2023
  
• DTS Monaco V8.16 and V8.14(V9.02 PAY 40USD TO ACTIVATE)
  
• Vediamo 05.01.01(Database 2019)
• Xentry Zenzefi Certificate
• EPC 11.2018
• WIS 10.2020
• SDmedia Offline 2014.1
• Star Finder 2016 & 2020
• PL72 2018.1

Xentry Zenzefi Certificate is a certificate issued to read and diagnose new car models after 2020 to 2024 such as W118, W167, W177, W213, W223, W214, W236, W243, EQC, EQE, EQS.

• Requires C4 with DOIP protocols to work offline login mode (registered version).
• Support period: 6 months for 1 renewal

SDconnect C4 Doip supports the following systems:

• Engine: ECM
• Transmission control module: TCM
• Air fork system (Airmatic) and Active Body Control Suspension Systems (Active Body Control Suspension Systems): ABC
• Anti-slip brake system: ESP / ASR / ETS / ABS / BAS / SBC.
• Airbag system (AIRBAG): SRS
• All body systems: OCP / UCP / LCP / SCM / DCM / RCM / KFB / SKF.
• SAM Unit body box: BCM
• Electronic Ignition system: EIS
• Air conditioning system: A/C
• Control panel:
• Parking assist system: Parktronic System
• Keyless go system: DHCU -VL, DHCU-VR
• Network connection system: D2B AND MOST
• Light adjustment system: SG-SW-L; SG-SW-R
• RVC, RST & Vario Roof modules
• Networking system: D2B AND MOST
• Seat Electronics: SEU
• Automatic Clutch System ACS
• Electric body of M-CLASS models: ( AAM / EAM / DAS / SEM )

MB Star C4 Special functions :

1. change the configuration of passive safety system (programmatically disable sensors front passenger W203, W210, W211, W220, Vito-638, etc.);
2. programmatically disable rear oxygen sensors (in the case of failure and/or in the event of a failure of the catalytic Converter);
3. remove the maximum speed limit on certain car Mercedes abd Sprinter without any additional devices;
4. activate regular TV;
5. disable the panel buzzer door closure and seat belts;
6. recode the headlamps with xenon;
7. adjusting the amount of fuel in certain modes (for example to improve the cold start of the engine A-Class);
8. adjustments-octane fuel the engine control unit for accounting when controlling the ignition timing and many others.

MB C4 Doip Package List:

1. C4 DOIP Multiplexer
2. OBD 16PIN Cable
3. 38PIN Cable
4. 14PIN Cable
5. 8PIN Cable
6. Lan Cable
7. Xentry Software Installed HDD