Clone OpenPort 2.0 is our newest tuning tool that is support with most OBDII vehicles ,As using a standard J2534 interface. Combined working with EcuFlash software, the OpenPort2.0 will reflashing ECU for newer Subaru and Mitsubishi vehicles.
With this High Quality Openport 2.0 Interface (Black PCB and Gold Pins),You will be stable use and special on Programming Job.No Worry that broken the ECU.But You should Disconnect Internet when use it,otherwise it may locked!!
Why buy This clone Tactrix OBD adapter ?
1.2022 version Clone OpenPort 2.0 ,New full chip and new module plan, Very stable and fast high speed .
2.Fixed problem that dead after 1 or 2 times used,No need worry again
3. New PCB with inductance to increase voltage, suitable for tuning car under different voltages.
4.Use the software and driver from CD ,otherwise it will broken
Tactrix Openport2.0 Passthru Interface Features:
1.Tactrix Openport 2.0 can works for Toyota Techstream, also work prefectly on JLR SDD Diagnostic Software .
2. Supports these protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line)
3.With ECUFlash software ,it will do ECU Flash job on Subaru ,Mitsubishi Vehicles.
4.As one Passthru J2534 Interface,it able setting to work for Xentry , ODIS (VAG),IDS (Ford /Mazda) and ECUFLASHER by ALEX…etc,But required Yourself Installed ,we do not provide service.
5.Tactrix clone Openport 2.0 is compatible work with PCMFLASH 1.20 Dongle
Stephanie –
I have used my Openport 2.0 clone to code,that is through Xentry/DAS and Vediamo without any problems.
I have also used it to Flash (software update) on my 451 TCU.