VCDS HEX V2 |VAGCOM Cable | VW OBD2 Diagnostic Scanner

Description

FLY VCDS HEX V2 Online Version :

This is really HEX-V2 VCDS interface ,not the fake HEX V1 .You can update firmware and online coding ,No worry about locked ,No VINs limited.

1. VCDS newest software upgrade to V25.12.0,That Included VIIPLusLoader V08.026.01 , FW V01.06.09  (Download link )
2. Best clone HEX V2 With STM32F429VGT6 Chip + LKT4106
3. VCDS V2 support Long Coding and Internet Connect.
4. Support new car on MQB, MLB and MSB platform
5. Newest V2 Loader Fixed bugs on coding Unit 46 module that rejected coding (error 31:request out of range)
6. Multilingual:English/French/German/Spanish/Portugal/Polish/Italy/Russia/Czech/Hungarian /Sweden/Danish/Dutch/Romania

Diffence between Fly VCDS V2(STM32F429) and Atmega162?

The Atmega VCDS cable is a bit slower ,you can not scan newer cars after 2017 Year,and sometimes You could not access some modules examole Hedlights.

How to update the vcds hex v2 stm32f429 ?

• Do not update the VCDS directly from MENU ,Otherwise it may locked .
• Get last version VIIPLUSLoader ,After That you can work on last VCDS APP .
  
• Install the last VII Loader and VCDS Programmer
• Start VCDS software from VII Loader but not directly from VCDS shortcut .

VCDS HEX V2 Support VAG OBD Diagnostics from 1996 to 2025 Year:

• Golf / Gol GTI / Jetta / Bora / Vento / Rabbit / Touran / New Beetle / Cabrio / Passat / Magotan / Touareg / Phaeton / Polo /
• Santana / Sharan / Transporter / Eurovan / Winnebago Rialta / VW Corrado / VW Eos / Audi TT / Audi A3/S3 / Audi A4 / A4 /
• Cabriolet Convertible / S4 / RS4 / Audi A6 / 100 / A6 / Allroad / S6 / Ur-S4 / RS6 / Audi 200 / V8 / A8 / Audi S8 / Audi 90 / Cabriolet Convertible / Audi Q7 / Audi R8

FLY VCDS Hex-V2 Diagnostic System Main Features:

• 00 Auto Scan
• 01 control module unit information
• 02 read fault codes
• 03 Output Test
• Selective output test (only for KWP-2000 *)
• 04 Basic settings
• 05 clear DTCs
• 06 Close Control Module
• 07 pairs of coding control module
• Slave control module for coding (only for KWP-2000 *)
• Read measured value block 08
• 09-channel read (applies only to KWP-1281 *)
• 10 matching
• 11 Log (known under KWP-2000 * Coding II)
• 15 View Ready
• 16 security access (only for KWP-2000 *)
• 18 All supported fault codes (only for KWP-2000 *)